Picture Stand

Small low-profile stand meant to be a simple way to stand up small photos. Generally unstable for large ones, but also incredibly cheap. You can print two for each side to add stability, or adjust the scale.

Last updated: 2/13/2023

.stl files:

PictureStand.stl (23 kB)

.step files:

PictureStand.step (26 kB)

Target Stand

Three part target stand meant for small or light projectiles. Designed initially for a rubber band launcher, therefore it is very responsive to slight forces.

Requires a rubber band and a pin of some kind: cut paperclip or piece of wire. Taping it down is very helpful, and any custom decal can be added.

Last updated: 11/23/2022

.stl files:

MomentSlot.stl (24 kB)

TowerStick.stl (3 kB)

UnderLay.stl (33 kB)

Custom PEZ Dispenser Hinge

Note: Requires some modelling skills, and decent printing tolerances.

This is the mechanism of the head for a PEZ dispenser. You can use it to create a custom head for PEZs. Take a 3d model of the head, and cut out the 22.50x22x17mm profile at the base of it. You can either combine the meshes, or glue in the mechanism into the open slot.

Last updated: 8/16/2021

.stl files:

PezMechanism.stl (30 kB)

.step files:

PezMechanism.step (61 kB)

GOT Stark Leather Stamp

Leather stamp with markings of the "Stark" clan from Game of Thrones. Can handle hammering into leather to leave the insignia. Made and printed as a gift for a former coworker.

Last updated: 7/31/2021

.stl files:

StarkLeatherStamp.stl (1,421 kB)

.step files:

StarkLeatherStamp.step (5,824 kB)

Saxophone Lyre

Saxophone lyre printable to save some money. Designed back to give marching bandmates one. Print both parts, and tape/glue a piece of carboard in LyrePartB's slot. Use a clip or clothespin to attach your music to the added backing.

Please be aware this was designed before studying engineering. There are some mesh errors and vestigial features, among poor design. Still functions, and may save you 10 dollars, though.

Last updated: 8/21/2019

.stl files:

LyreTypeB.stl (11 kB)
LyrePartB.stl (53 kB)